Yennefer in Purple - Hueforge Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yennefer of Vengerberg - from the Netflix Witcher Season 3
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yennefer of Vengerberg - from the Netflix Witcher Season 3
Note: The roll of Fuschia colour that I have prints purple when it's a thin layer over black, hence why the print looks purple. If you have an actual purple filament, it will be safer.
The included stl file is for a 97x97mm print, however I printed it at 200mm x 200 mm. You can adjust this in your slicer but BE CAREFUL to NOT have 'Uniform Scale' ticked otherwise it will also scale your z height and you don't want that!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA Siddament Black Transmission Distance: 0.2
- PLA+ Sunlu Fuschia Transmission Distance: 6.8
- PLA Sunlu Beige Transmission Distance: 8.2
- PLA Sunlu Lilac Transmission Distance: 6.6
- PLA Sunlu Beige Transmission Distance: 8.2
Swap Instructions:
- Start with Black
- At layer #16 (1.36mm) swap to Fuschia
- At layer #20 (1.68mm) swap to Beige
- At layer #28 (2.32mm) swap to Lilac
- At layer #29 (2.4mm) swap to Beige for the rest.
Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.
Category: Other