Solar Light Panel Holder / Riser - Colour Bond
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These nifty little clips hold your solar light panels up above your fencing.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
These nifty little clips hold your solar light panels up above your fencing. These are specifically designed to clip on the top of colourbond fencing (that's what it's called in Aus - It's just aluminum fencing).
If you're like me and have tall fences with nearby garden beds, you'll probably find your solar light panels don't receive full sunlight due to the shading. This overcomes that by clipping them high on the fence line!
I've had mine out for about 3 months now, using PETG. The frame has deformed slightly, but the integrity is still fine and seems now to be stable. Printing at 100% infill may help with that.
Specs:
Solar panel loop = 24mm / Clip clearance = 54mm
Recommended Material: PETG / ABS
Infill = 50 - 100% (it's thin and light, so the material usage won't be all that much more)
Walls = 2
Supports = No (I didn't need them but you can use them for 75-80 degree overhangs if you're experiencing issues on the loop).