Buttons & Bows Mouser Fidget Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm a Disney lover through and through, this is the 2nd model of disney inspired fidget spinners that I've created.…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a Disney lover through and through, this is the 2nd model of disney inspired fidget spinners that I've created. This will require 9 #10 washers (mine are from midwest fasteners) and the print will need to be paused just before the holes are covered (at approx 4.1mm) and the washers will need to be placed so that they are embedded into the print.
The bearings used here are 688s which are fairly expensive, they are a 16mm outside diameter bearing so any 16mm bearing will work.
If you would like one that I have made, they are available on my Etsy store, abuzzdesigns.etsy.com
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Doesn't Matter
Supports:
No
.2
Infill:
100%
Category: Toys & Games