1 / 1
Pola G roundhouse add-on: roof inner side bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps the roof in place (wind protection)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
To protect the roof from wind (which may blow it just away), I added inner side-brackets to keep the roof in place.
Print 2 as is and 2 mirrored (i.e. you need 2 parts for each side of the roundhouse)
Note the angle for the roof slope. The bracket grips the side wall - this end must be aligned horizontally. Glue the brackets to the roof part exactly in line after the moulded guide.