Plant Clip for wall/ceiling mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily snaps together and can be opened again. Use double sided tape or a nail to mount it on the wall or ceiling.
- Ocena
- 5 / 5
- Polubienia
- 584
- Pobrania
- 2418
- Wydruki
- 23
- Wyświetlenia
- 6704
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple two parted plant clip to be mounted on your walls or ceiling.
I recommend printing them from PLA for better surfaces for the hook to hold on.
Simply mount the body to your wall or ceiling either using double sided tape or a nail/ screw up to 3mm. Snap the lid on and close it after hanging your plants in.
Just activate support enforcers only and slice it.
I added a negative volume to the .3mf file which will create the hole for nail mount. Remove this volume if you prefer a closed bottom and you are ready to go.