Tiny funnel that fits 6mm disposable straw (for Kratky hydroponics)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small parametric funnel that is meant to fit narrow disposable straws, to be used to refill hydroponics solution.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A tiny funnel that is printed in Vase mode, without top or bottom.
In Cura, it's enough to set Surface Mode to ‘Surface’. In other slicers you might have to manually set top and bottom to zero.
I printed with 0.6mm wide lines; wider lines failed to adhere in my tests. The funnel doesn't leak while being used.
If you are going to customize the model in FreeCAD, all the constraints of the sketch are named and can be changed without opening the sketch. There is also a Step file, I know some of you love the step files :)