Articulated Shark Fidget Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My personal spin on an Articulate Shark
- Ocena
- 4 / 5
- Polubienia
- 151
- Pobrania
- 1382
- Wydruki
- 4
- Wyświetlenia
- 3988
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I see a lot of articulated stuff floating around. I'm new to sculpting in the 3d workspace but I like a challenge and so I thought I would take a stab at my own version of a shark. I gave him more of a cartoon big human teeth smile because I thought it would be funny. I hope someone will enjoy it.
no supports needed.
Recommend Size - 6in or bigger with a .4 nozzle. Smaller I would use a .25 nozzle.
I used PLA
Brim is optional. I have had success with and without.
TROUBLE SHOOTING
If you don't have great cooling the tip of the fin will distort. Add a square or cylinder a few inches away from it, the same height, and just half inch (12mm) wide and it will print fine.