Wall Mount Hat Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small, easy to print, hat rack for that collection of baseball caps piling up
- Ocena
- 4,8 / 5
- Polubienia
- 140
- Pobrania
- 1002
- Wydruki
- 5
- Wyświetlenia
- 4661
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a way to collect my caps in one place. This model holds 8 caps with ease. It easily works with flat-bill caps and works well with slightly curved bills. Very loved and curled bills will be flattened out with this design.
Printing Suggestions:
- Print on side with slots going vertical.
- Increase number of walls 4-5 should be enough.
Use 2x #8 screws to attach the hat rack.
I used 2x #8 - 1inch screws and attached it to drywall. Just screwed it in with a screwdriver until it felt snug. I did not want to strip out the drywall.
In your slicer, I would cut a small portion of this model to see if it fits your caps bill.
Enjoy!
UPDATE:
10/27/2025
Version 2 with slightly thicker bottom rung for rigidity.