1 / 3
Elite Force G18 Mag Sleeve and Baseplate (Airsoft) — zdjęcie 1
1 / 3

Elite Force G18 Mag Sleeve and Baseplate (Airsoft)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Vector inspired mag sleeve for the Elite Force G18.

Ocena
0 / 5
Polubienia
13
Pobrania
183
Wydruki
0
Wyświetlenia
1440
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print instructions:

Print in the orientation provided.

No supports needed.

Recommended materials: PETG, Nylon, PLA+ (Indoor or low temps use only)

.02 Layer height


Assembly Instructions:

Remove original baseplate, 

Slide sleeve onto magazine from the top, with the most extended part facing the back of the magazine,
 

Bring sleeve almost to the end so that it aligns with the top most channel on the baseplate,

Slide the baseplate onto the magazine and over the sleeve at the same time until it clicks into place.


 

Tagi