PetSafe Simply Clean Litter Guard and ramp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A litter guard to prevent litter being thrown outside the litter box by your cat, and a ramp for easier access in & out
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Parts to make a litter box guard for the PetSafe brand Simply clean litter box. I used a thin plastic intended for use cutting boards of the guard and use these printable pieces to hold in a round shape. They have small interlocking tabs and slots to connect them together. The start and end pieces don't have tabs and slots on one end. There are 3 pieces for the bottom, print 1 start, 1 end and 4 mid, and the same for the top. But the start and end pieces are option and you can print 6 middle ones in stead if you want, they will just have unused tabs on the end.
The ramp print in an orientation with the top of the ramp down. You may have to flip the on part of the ramp 180 degrees and the ramp flipped 147.85 degrees to print flat side down.
printed in PLA at 50% infil at 0.2mm