Molly Guard for switch of x-way socket (e.g. IKEA Koppla)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed... I desingned 2…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 643
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to cover the switch of my Koppla 4-way socket which is right next to the op of my bed...
I desingned 2 Verions of the molly guard, for the first you need some support for the hinge (I used a metal paper clip and glue to close the holes on the side) the second does not need any furhter parts.
I glued the molly guard to the extension socket using double-faced adhesive tape.
Added a "light shield" since there is still quite some light going through if you print the lid in white. Just glue the shield inside the lid.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
Yes
0.15mm
Infill:
15%
Filament:
REC PLA White
Category: Other