Modular Plant Climber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,14 € – 5,06 € netto (bez VAT)
Dla pliku: modular-plant-climber_5h15m_0.20mm_220C_PLA_ENDER3V2.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,60 € netto (środek widełek).
- Masa podana przez autora
- 44 g
- Czas druku podany przez autora
- 5,25 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Modular system to build a plant climber tailored to your plant
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
The set contains the following parts
- 120mm poles
- 80mm poles
- vertical connectors
- revolving connectors that can connect at any angle (composed of male and female parts)
Print however many of each you would like.
Printing instructions
It is pretty much impossible to print a perfect cylinder horizontally, but I still decided to print mine horizontally. The bottom is a bit flattened, but it’s almost unnoticeable. I tried to also print a pole vertically and the shape is more perfect, but it takes ~3x the time on my printer.
The other parts are easy to print.