Replacement solar stake for solar light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solar stake designed to save some solar lights from the trash because the stakes broke.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This custom solar stake was made to save some old Aldi solar lights. The lights work great still but all the stakes broke. I have looked for replacement stakes but have not found any that would work so I made some. If you need any specific solar stakes modeled I would happily design some for you!
The two part design makes 3d printing easy. You do not need supports.
Lights model is for: Aldi's Gardenline 6-pack solar lights from about 2016-2017
How to print:
I think ASA would be the best material to print these out of. They are two part stakes to make printing easy. You do not need supports. all the parts are ready to slice.
Assembly and install:
Step 1:
Step 2:
Step 3:
Step 4:
If you are having trouble assembling the stakes by hand you can print the stake tool. Set the tool with the hole side up and place the stake stopper ring in the indent. Then press the stake into the + shape on the stopper ring. You can gently hit the tip of the stake with a hammer.