Jumbo Flexi Carnotaurus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this Jumbo Carnotaurus to stands up straight and horizontal, without drooping. Designed for the Prusa Mini.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed this Carnotaurus to stand up straight and horizontal without drooping. I created this to print as large as possible on my Prusa Mini. Print the head, body and tail separately, then use the pins to connect them together.
If you are looking for a smaller size, the Carnotaurus Small Version can be found here: https://www.printables.com/model/584373-flexi-carnotaurus-small-version
*Important*: When printing the body on the Prusa Mini, you need to add it the build plate, then click the “Arrange” button at the top of Prusa Slicer to make it fit.
No supports needed, I printed mine in PETG with 20% infill
Side Notes:
- I uploaded the files separately as well as all together. The file with the “Full Carno” can be scaled up as large as you want (e.g. to fit the Prusa XL build plate). Then use the cutting tool in Prusa Slicer to separate them and print individually.
- If you are having issues with the pin not fitting (too large or too small) scale it up or down in your slicer to make it fit.