1/4" Male Air Hose Tool Hanger Beltloop Quick Connect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beltloop for 1/4 Inch Male Universal Air Hose Quick Connect Adapter to Hang Air Tools
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This beltloop hanger works with any ¼" standard quick connect air hose male NPT. It holds (1) tool. I am able to walk around and make fairly quick movement changes without the tool falling out.
I used PLA with anywhere between 15-30% infill. Did not see any structural differences in the part.
No supports needed.
0.2mm layer height on a 0.4mm nozzle.
There is a sweep upward of the holding surface to ensure the tools does not easily fall out if bumped.
I have added a few fillets, radii, and material reduction from the original model to give it a bit more of a stylish appeal while removing many unnecessary sharp(er) edges.