1 / 1
Audio-Technica ATH-M40x Swivel and Yoke Replacement — zdjęcie 1

Audio-Technica ATH-M40x Swivel and Yoke Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Audio-Technica ATH-M40 Swivel and Yoke Replacement. No Hinge to Break

Ocena
4,5 / 5
Polubienia
22
Pobrania
423
Wydruki
3
Wyświetlenia
1832
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

While the Audio-Technica ATH-M40 is a great choice for closed headphones around $100, they have one major flaw. The hinge attaching the yoke to the headband isn't as robust as we would have liked. When the hinge on my original M40x broke, I took it upon myself to design a more robust replacement.

I recommend printing in either ABS or PETG, for added flexibility over PLA. Especially the yokes. When printed in PLA the yokes tend to snap while installing.

Material

 PETG or ABS

Layer height

 ≤0,2 mm

Infill

>15%

Perimeters

3

Top/Bottom

3+ layers 

Support

Supports are required on all parts aside from swivel plates.

 

Other Thoughts

When it comes to installing the slide adjusters, I recommend using something to heat the part slightly to allow it to better match the curvature of the metal part it mounts to.

If you find the swivel is too stiff, try sanding the swivel pin with 220-grit sand paper, or adjust clearance in included step file. Parts do eventually break in with use so expect swivel to free up over time.

Still a work in progress. Hope you Enjoy.

Tagi