Monstera Moss Pole - MossyHydrator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed moss pole with built-in drip irrigation for hassle-free plant support and hydration.
- Ocena
- 5 / 5
- Polubienia
- 239
- Pobrania
- 1301
- Wydruki
- 16
- Wyświetlenia
- 9814
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A modular moss pole with built-in drip irrigation for Monstera and other climbing plants. The pole screws together in sections, so you can extend it as your plant grows. A watering funnel on top lets water wick down through the moss — no more daily misting.
Three sizes available:
- 68mm diameter — heavy duty, includes optional drip irrigation attachment
- 50mm diameter (braided) — lighter, decorative look
- 50mm diameter (simple) — compact and quick to print
Components
Base — stable foundation with three 1/4" fiberglass rods for anchoring in the pot
Threaded sections — modular, screw together for the height you need
Watering funnel — sits on top, small holes encourage wicking into the moss
Drip irrigation container (68mm only) — attaches to the pole with adjustable water flow (Version 2 has built-in flow control, no external dripper needed)
Bill of Materials
Fiberglass rods (1/4" diameter) — cut from a driveway marker rod from Home Depot
1/4" distribution tubing + 1/2 GPH dripper (optional, for drip version) — Amazon
Silicone grease or food-safe lubricant for the threads
Print Settings
Material: PETG (I used Hatchbox brass/copper PETG)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Supports: none
Brim: recommended for funnel and pole sections
Apply grease to threads after printing — PETG threads need lubrication to avoid binding
Videos
Moss pole overview: https://youtu.be/Y5WApOehLeY
Thread test (68mm): https://www.youtube.com/watch?v=ERsuZbylkbY
Drip container V2 demo: https://youtu.be/C86mdIPSIhU
Drip adjustment: https://youtu.be/CH6IyUV5rSg
Changelog
11/27/2023 — Posted thread test video. Reminder: lubricate threads for smooth operation.
10/03/2023 — Added Version 2 drip container with built-in flow adjustment — no external dripper needed. Small print support inside knocks out after printing.
09/21/2023 — Added drip irrigation container for 68mm pole with 1/4" tubing and shut-off valve.
Bonus: If you printed the 68mm model, the top section doubles as a Dwarf Star Christmas decoration.