BL LED Case with 24v Power Tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case holds the BL LED and Bambu Power Tap (24v)
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 1048
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Works with Bambu Lab X1, X1C, and P1P printers.
Uses two (2) Bambu Bus Cables.
Items Needed to Construct the BL LED with 24v Power Tap:
BL LED for sale at dutchdeveloper (Etsy Store)
Power Tap Kit and extra Bambu Bus Cable for sale at 3DMachinist (Etsy Store). Order the V1.3 version of the Power Tap.
Installation
Install on the back of the printer using the top two center screws using:
2x M3x22mm screw
If you have a riser, verify it does not extend beyond the back of the printer. The BL LED Stand-Off is when you need to move the case further away from the back of the printer due to the riser. Use M3x6mm screws to attach the stand-off to the printer. Stand-Off will give you an additional 20mm.
Specification
Materials: Plastic, metal, printed circuit board
Recommendations
Filament: PETG Gray
Infill: 25%
Support: Yes, Tree
Brim: Auto
If you would like to buy me a cup of coffee.