1 / 1
Theo Klein Bosch 3 in 1 Screw and Nut — zdjęcie 1

Theo Klein Bosch 3 in 1 Screw and Nut

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Screw and Nut for Theo Klein Bosch Construction Sets

Ocena
5 / 5
Polubienia
10
Pobrania
151
Wydruki
3
Wyświetlenia
672
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial

Screw and Nut for Theo Klein Bosch Construction Sets

Original screws are very smooth, therefore they cannot be fastened properly or they become loose after some playing. So, i designed some screws myself, which can be used with the original toy screwdriver.

Screw is not not compatible with the original nuts, but you can use the nut with the original screws

In the beginning it is a tight fit, but after some action it screws easily and holds pretty tight.

One disadvantage of this, compared to the original one, is the brittleness. If you keep throwing them on hard floor or over-tighten, it breaks.

I printed using PLA and 0,07mm layer height.

Tagi