Contemporary Egg Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried printing the model with 2 different settings. Provided your printer is tuned as is mine, there are a few ways…
- Ocena
- 4,625 / 5
- Polubienia
- 27
- Pobrania
- 266
- Wydruki
- 11
- Wyświetlenia
- 1018
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried printing the model with 2 different settings. Provided your printer is tuned as is mine, there are a few ways to print this.
On my first attempt I printed at 60mm/s with no supports (as displayed on a comparison picture on the left), the model turned out pretty bad with lots of blobs and zits due to poor cooling. So if your cooling is adequate, your result may be significantly better without supports. As my printer doesn't have great cooling at the moment I ended up printing slower the second time (30mm/s) with lots of supports with interfaces (it was pretty hard to get those supports off later, but it was worth it). My second attempt is illustrated on the right with an almost perfect surface.
Note: I printed the models naturally (upside up), the cups are flipped for better demonstration of printing quality.
Print Settings
Printer:
Kingroon KP3
Rafts:
No
Yes
Resolution:
0.2
25%
Filament: Generic PLA White Post-Printing
How I Designed This
Category: Kitchen & Dining