Melting Skadis Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
melting Bin for Skadis boards in four sizes & divided versions
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
liked the Melting Wall Mounted Bin design by dePrintinator and wanted to put it on my skadis boards, since the original model is quite large I added some scaled down sizes.
what to know about this
the bin comes in four sizes, S (~35x75mm opening), M (~45x95mm), L (~70x145mm) & XL (~95x195mm). I also prepared devided versions in each size.
the hooks print separately and come in two versions, the one labeled „minus“ is meant for unpainted skadis boards, the „plus“ is for black/white ones. Size S needs 2 hooks, M can keep 3, L 4 & XL 5
hardware & tools
no hardware or tools required (besides for removing supports)
stop palaver, start printing and making things
these settings are just guidelines
| material | nozzle | layers | perimeters | infill | top/bottom layers | support | brim |
|---|---|---|---|---|---|---|---|
| PETG | 0.4 | 0.2 | 2+ | 15%+ | 4+ | organic | yes* |
* be careful when taking of the bed and deleting brim
— > I did not try to print it without support so far, the original author states it is possible if your printer bridges good
assembly is pretty easy just push the hooks in place and you’re done (a drop of glue can secure them in addition)
update history
—> none so far
what else
happy printing! if you like my work I highly appreciate every make and rating, same for likes, remixes & shares.
donations will be forwarded to sea-watch.org