XH-M609 voltage cutoff case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With a mount for a 40A automotive relay
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a battery protection circuit for a DeWalt battery being used in a PowerWheels jeep.
It is old and missing the hood, so I needed to protect the xh-m609 voltage cutoff, board, but also wanted to see the voltage readout. It will be upside-down when mounted, but oh well. The jeep seems to draw up to 30A when starting out, so I wired in and included a mount for a 40A automotive relay.
required hardware:
1x m6 x 20 bolt & nut to mount the relay
4x m2.5 x 15 to mount the board to the case top, screen cover and spacer. (if requested I can change the hole size for m3 screws)
4x m3 x 30 self tapping screws
glue for sealing.