1 / 6
Vertical Blind Wand Universal Joint
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Universal Joint piece for vertical blinds with wands rather than cord.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
This quick print allows you to replace the universal joint used in some vertical blinds that use a wand rather than a cord.
The blind uses two 3mm screws to mount the piece in line with the wand.
The single prong of this piece has a 3.5mm hole to allow the screw to pass through.
The other side uses a 3.5mm and a 2.5mm hole. The 2.5mm uses the screw to cut a thread.
I have included two STLs:
One that has a support and the 3.5mm hole partially filled in.
The other you can print with your own supports.