Silicone trowel / Silikonabzieher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool to smooth silicon joint
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 496
- Wydruki
- 5
- Wyświetlenia
- 2434
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello,
i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested them. They worked as expected. I finaly experienced, that the tip size of the silicone tube is very important and added a recommended tip cut in 45° directly in the tools. As mentioned in the comments, this holes are quiet too small and i added a cutting tool for the silicon tips.
Tools can create silicone joints from 15 to 6 mm. I tried different shapes (as you can see in last picture), but there was not a big difference and i used a default circle shape. Other shapes are possible.
I recommend to smooth the tip with little sanding (240-400), to have a really smooth edge.
Print with at least 3 perimeter and 15% infill in the orientation provided. I used dynamic layer height to have a very smooth tip (0.24 to 0.08 layer height). This also decrease print time, as most will be printed in 0.24. No supports needed.
Feedback is always welcome.
Best regards
Brainbug