Body and Foot Awesome Massager ;)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in Place body massager
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 302
- Wydruki
- 0
- Wyświetlenia
- 1052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I design this massager mainly for my wife, but kids seem to like it more ;p
It's massager/roller for body and for feet. There is 3 stages of massage “power”.
To print please open “base.stl” then choose whatever type of roller you want and add it to “base” plate. After slicing check for clearances. I prefer hard/strong one because its great for deep massage for foot.
PLEASE REMEMBER to make around 0.3 xy hole compensation for base smooth operation.
I printed handles, bolts and red roller with MK3S+ with 0.6 nozzle, 0.2 layer height and it took around 15h.
Yellow and silver was printed on P1S with 0.6 nozzle, 0,24 layer height and each took aroud 5,5h.