Floating Book Shelfs up to 16.5 lbs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Real Floating book shelf with cover support.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 287
- Wydruki
- 2
- Wyświetlenia
- 1484
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wife challenged me to make a floating book shelf that will compete with the thin metal ones you can purchase online. Challenge was accepted and this is what I came up with.
I have two versions:
V1 is heavy-duty up to 16.5 LBS see pictures.
V2 is for the slimmer books that are not bulky uses less filament. can't hold as much weight.
Both models have 4 mounting holes, but I only used the top ones as my mounting hardware is more than sufficient. I left the 4 hole as an option depending what mounting hardware you are using. The mounting holes are 4mm and countersunk for a 7mm screw head.
Both were printed with Bambu Lab P1s .4 nozzle 25-30% infill 3 wall loops with Bambu PLA.
I recommend laying it on one side for easy printing and strength.