Crankbait Keeper Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This item is used to join multiple fishing lure tubes (Crankbait Keepers) into an organized assembly. Sized to fit.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
If you have started using the crankbait keeper lure tube system (search crankbait keeper on this print library) you probably have a lot of tubes by now. I do. They self organize neatly into drifts in my tackle bag, but I have wished I could easily join them together into small organized groups.
These sleeves slip (firm fit) over the crankbait keeper tubes as modeled and printed in either .2mm or .3mm layer height. Then the tabs on the rings can be snapped together into just about any configuration of hexagonal tubes.
Print these at .3mm layer height in PETG for flexibility. Each one takes 16 minutes to print when Z height is 9mm. If you scaled your crankbait keeper tubes, you will need to scale and fit these.