Replacement Foot for Thermaltake Core V21 SPCC Micro ATX Cube Computer Chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot, designed by measuring original. Does not have retaining clips. Use glue, or add a cross hole.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Replacement foot, designed by measuring original. Does not have retaining clips.
https://www.amazon.ca/Thermaltake-Micro-Computer-Chassis-CA-1D5-00S1WN-00/dp/B00PDDMN6S
Foot broke off from me pushing/pulling it across the carpet. The original had retaining clips that could easily break. I was giving this case to my sister as a hand-me-down so I wanted to make a replacement foot for her. I printed this on my Ender 3 Pro and super glued it to the bottom. Its infrequently seen and needs not be removed so it is sufficient to provide a looser fit and rely on glue.
Install instructions
Use glue, or add a cross hole and pin. This was a quick fix so I did not recreate the retaining clips.
Print settings
Print flat side down.
Instead of using infill I recommend using perimeters for strength.
Send me bux
If I saved you time or money send me buxs
https://ko-fi.com/bunnysayebooks