Creality Spider v2 Adapter for Creality Ender 3 v2 Neo printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use the Creality Spider v2 hot end on Creality Ender 3 v2 Neo printers with out relocating the fans.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 293
- Wydruki
- 1
- Wyświetlenia
- 2264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter to use the Creality Spider v2 hot end on Creality Ender 3 v2 Neo printers with out relocating the fans.
The Creality Ender 3 Neo, V2 Neo and Neo Max have a hot end and carriage that is different than the rest of the Ender 3 line.
This project started as a concept where metal would be used to relocate the posts on the carriage to allow regular hot ends compatible with the Ender 3 line up. I showed it to a friend who made a printable version for his Spider v3 but that one is not compatible with the Spider v2
The Spider v2 has to be mounted lower on the carriage then the stock Neo hot ends and higher than the Spider v3.
You will need to use some spacers to move your CR-Touch down about 1.5 mm or your hot end will hit the bed before the CR-Touch. These can be printed but I used metal washers as I didn't want them deforming over time.