Blippi Alexa dot gen 2 holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decided to make an Alexa dot gen 2 holder for my big Blippi fan in the house. All the files are here and you can use
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Decided to make an Alexa dot gen 2 holder for my big Blippi fan in the house. All the files are here and you can use the height changes for easy filament changes in your slicer software. The bowtie file is blank so you can bring it into a cad program (like tinkercad) and add text to it yourself if you want to.
Only the bottom base and back holder need supports, the rest will print fine without supports.
Hope your little Blippi fan loves it, as much as mine does!
Thanks to https://www.thingiverse.com/thing:4961788 for designing the Blippi face I used in this build. It worked perfectly for this design.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament: inland pla+ orange Post-Printing =============
Once you finish printing everything, just super glue it all together. It is easier if you run the cable through the base first then connect the plug to the alexa dot gen 2 then slide the whole thing into the holder. It is a tight fit so be careful when sliding the dot into the holder as you may pop the front face disk off if you push to hard.
Category: Gadgets