1 / 1
X5SA Pro Y-Axis endstop and reinforced pulley mount.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This provides a solid mount for the idler pulleys, and a stop for the Y-Axis if you're using sensorless homing.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 217
- Wydruki
- 2
- Wyświetlenia
- 1599
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (2)Kolekcje (48)Powiązane
This provides a solid mount for the idler pulleys, and a stop for the Y-Axis if you're using sensorless homing. Also clamps down properly on the Y-Axis rails without the little gap that the stock mount leaves.