Flechtkorb - Wickerwork basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single-piece wicker basket for the bathroom or other purposes to store well small bottles, cans and other.
- Ocena
- 4,909 / 5
- Polubienia
- 245
- Pobrania
- 1695
- Wydruki
- 23
- Wyświetlenia
- 5001
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Good results without any support-structures. Print needs 25h with a Creality Ender 3 S1 Pro and 60mm speed (via Klipper). Because of the enormous number of edges, you should do some fine-tuning in optimizing the speed at corners and the flow control.
In the pictures of the printed basket, you can see an extra corner. This was a test print to check if you can print without support. The basket is in one piece, and you don't have to join any parts.
Update
2023-12-19
Variants have been added in which the base has no holes. Check the extra folder.
2023-09-27
Added a smaller basket (~ 131 mm * 92 mm, height = 42 mm) with the same design and same braid size. So this is not only a shrunk version, it's a beautiful addition to the big basket.