Einhell Trimmer Replacement Head (String)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transforms your Einhell Single-Blade Trimmer into a string trimmer
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 420
- Wydruki
- 5
- Wyświetlenia
- 2165
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Transforms your Einhell Single-Blade Trimmer into a string trimmer.
Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear.
Printing
Choose an infill method that fills the object evenly, i.e. Rectilinear, to keep the center of gravity in the middle,
Other Materials
Compatibility Matrix | v1 | v2 |
Garden Wire | yes | might melt plastic |
Scoubidou String / Lacing Cord | yes | yes |
TPU cut from plastik spool | untested | perfect (most durable) |
Off-the-shelf trimmer cutting spool cord | untested | perfect (most durable) |
Assembly
The head has four pairs of holes, through which you put the wire (You can get away with only populating two pairs, as long as they are opposite of one another).
Cut off two (or four) pieces of string/wire, about 20cm each.
Bend the wire about half way and push one side through one of the holes
(v1 only: loop the other side around the centerpiece and through the other neighbouring hole.)
pull the other side through the other hole, so both parts stick out about the same length
(v1 only: twist together)
repeat 2-5 for the other sides
make sure the wire/string won't touch the plastic shield, cut to length if needed, but make sure all sides are the same length