Steam Deck Stand for Aukey CB-71 USB-C Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this stand to make use of my Aukey CB-71 USB-C Hub. The hub enclosure snaps nicely onto the back of the stand.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The honeycomb pattern allows for airflow, especially for the deck fan intake, but in my experience the USB-C hub can generate some significant heat as well. I have not tested this thoroughly, use with caution.
I would recommend printing with something more heat resistant than PLA, at least PLA+ or better PETG. I will update this post with more information once I've tested a PLA print for a while.
Print with 0.2 layer height, 3 perimeters and 4 top and bottom layers.
I recommend printing the stand with a brim to increase bed adhesion. I printed the stand with 25% adaptive cubic infill, it's very sturdy and you can probably get away with less.
Make sure to clean up the snap fasteners and the corresponding holes after printing so they will fit together.