Slidey Filament Splicer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Join" the fun
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 2352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you have numerous filament ends that just take up space? Do you want to join 2 spools together? Well now you can! Introducing the Slidey Filament Splicer
This is a simple filament splicer i created in Fusion 360. The design includes 2 blocks, one fixed, and one that can slide on a 10mm carbon fiber rod (any 10mm rod works). In between the two parts of a block, a bowden/capricorn tube is used for better gripping precision. The sliding block allows you to keep the filament strands slightly separated while a lighter is used to heat them up. To join the strands, just push together the two blocks, while rotating the sliding block to align the ends.
Bill of materials:
- 1x 10mm diameter rod, min. 80mm in length (carbon fiber recommended)
- 2x 20mm length Bowden/Capricorn tube (Capricorn recommended)
- 6x M3 x 25mm screws
- 6x M3 nuts
- glue (to attach one block to the rod and the tube to the blocks)
- 1x lighter
- 3x patience
- 10x happiness
I am always open to suggestions to improve the design, and I'll update it if necessary.
Happy printing!