Farsan / Hwasan / Hudson / Dongsan Airsoft Shotgun APS Shell conversion kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A conversion kit for a Hawsan Airsoft Shotgun, to use APS Shells.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 338
- Wydruki
- 1
- Wyświetlenia
- 4548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A conversion kit for a Hawsan Airsoft Shotgun, to use APS Shells.
Printing:
All parts with 100% infill or
1x Shell Extractor 0.1mm (No supports, maybe brim)
2x Valve Pusher 0.1mm (Supports on Buildplate)
2x Chamber Sleeve 0.2mm (Supports on Buildplate)\
Be careful when removing supports.
Follow this guide for assembly
Warning: The chamber sleeves might need sanding on the outside, it is a VERY tight fit. Be careful when pushing the sleeves in, they are thin. I used the back end of a hawsan shell to push it all the way in without breaking them.
The pusher ends might protrude from the holes, even in the back position, to fix this just cut off a small piece until they're just short enough. 1mm should be enough.
These designs are made with fdm printing in mind and might need additional fitting with other printing types.
Re-upload of my design on thingiverse, since I prefer Printables