1 / 2
GT2 belt cutter from 10mm or more to 6mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basically had a 10mm belt and needed a 6mm one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Basically had a 10mm belt and needed a 6mm one. This model needs a razor, 2 m3 bolts with washers and nuts. Secure the razor with the bolts in the holes and pass the belt through.
