Samsung Odyssey low profile stand.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile 2-piece stand for the Samsung Odyssey monitors. Includes angle adjustment*
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Low profile 2-piece stand for the Samsung Odyssey monitors.
Angle adjustment:
Includes limited angle adjustment - The lowest angle is still pointing up, because in it the monitor rests directly on the bottom half of the stand.
The bottom surface of the monitor is actually slightly angled hence the upward angle.
This angle is not much of a problem because the monitor is so for down with this stand.
! If you choose to adjust the angle higher up make sure to print both parts from a strong material and sufficient slicer settings, because this will make the top half and the screwholes of the bottom half load-bearing.
Design:
The visible part is designed with flat walls and angled edges to match the design of the monitor. It also has a cutout for your finger to access the controls. The height is enough to do it comfortably and allows you to put it on a flat surface, while still allowing the speakers to fit.
Structure:
The two parts are bolted together with 4 M4 bolts and nuts, so it ain't going anywhere.
