1 / 12
Sink / Tub Strainer 40 mm (1.5 inch) — zdjęcie 1
1 / 12

Sink / Tub Strainer 40 mm (1.5 inch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sink / Tub Strainer for 40 mm (1.5 inch) drains

Ocena
5 / 5
Polubienia
13
Pobrania
106
Wydruki
1
Wyświetlenia
338
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

I created this Sink / Tub Strainer for 40 mm (1.5 inch) drains to prevent large objects (like screws) from going down the drain in my utility room sink.  Before long, I realized that it was also the perfect addition to my bathroom tub.

This sink / tub strainer has been designed for easy use - simply drop it into the drain and lift it out when ready to clean out whatever it has collected.  Eight channels on the bottom of the flange prevent puddling by providing a path for ALL the water to drain!

The provided STL file is intended to be printed in PETG and should be printed with supports.

A PrusaSlicer 3MF file using organic (tree) supports is provided for generic PETG, and a G-code file is provided for the Original Prusa MK4.

The sink / tub strainers seen in the photos were printed on an Original Prusa MK4 in generic green / white PETG with a 0.4mm nozzle at 0.3mm layer height with a 15% gyroid infill and organic (tree) supports.

Tagi