E3D Revo Gridfinity Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity based box for your E3D Revo nozzles and spare parts.
- Ocena
- 4,833 / 5
- Polubienia
- 99
- Pobrania
- 550
- Wydruki
- 8
- Wyświetlenia
- 5076
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the “Rugged Box (Parametric)” by Whity with the inner parts of the “Gridfinity Storage Box” by Pred, that comes with a variety of Gridfinity bins to hold the E3D Revo parts.
When I saw the “Prusa (Tools) Rugged Boxes (Parametric)” model by 3DesignsCH, I knew I wanted to have such a box for my E3D Revo spare parts. I first thougth of using the “Gridfinity Storage Box” by Pred, which is totally awesome, but I wanted to have something less chunky. So I combined the “Rugged Box” and the “Gridfinity Storage Box” into this box.
Box
You need to print
- 1x bottom
- 1x lid
- 1x handle
- 2x latch
- 1x seal (optional - print seal out of TPU)
You have two bottom versions to choose from:
- One with round magnet holes for 6x3mm magnets that you need to glue in
- One with hex shape magnet holes for 6x3mm magnets that you press in
You have two lids to choose from:
- One black lid
- One lid with “E3D Revo” logo
The lid with the logo is best printed with a printer with MMU/AMS.
Assembly
For assembly you need
- 6x M3x30mm screws for the hinges and latches
- 2x M3x18mm screws for the handle
- 2cm thick foam for the inside of the lid (optional)
Print settings
The box is printed best with the following settings:
- 3 Perimeters/Walls
- 5 Bottom/Top layers
- 20% infill
- 0.2mm layer height
- Arachne for wall generation
Gridfinity Bins
The gridfinity bins allow to have the inner parts of the box modular. You can reoder them, leave some spaces empty and adapt them to your needs. The design is partially remixed from the E3D Revo Nozzle Organizer by Fabian.
Revo Nozzle Holder
Bin for your Revo nozzles
Revo Heater
Bin for your Revo heater cores. You can choose from a bin for a single heater core or a bin for three heater cores.
Revo Heater Sock Holder
Bin for holding heater socks and springs for the heater. Comes in a small and a big version.
Revo Nozzle Sock Holder
Bin for holding nozzle socks. Comes in a small and a big version.
Revo Combined Heater And Nozzle Sock Holder
Bin for holding nozzle socks and heater socks/springs. Comes in a small and a big version.
Small Parts Box
A box for all the small parts. Use four 3x1mm magnets to keep the lid closed magnetically.
Revo Voron Heatsink
Bin for holding a Revo Voron heatsink.
