Airsoft: Simple magazine holder for glock style magazine with molle support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,63 € – 4,44 € netto (bez VAT)
Dla pliku: 3er_Halterung_Glock_Magazine_2_0.4n_0.2mm_PETG_MK3S_4h11m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,04 € netto (środek widełek).
- Masa podana przez autora
- 51 g
- Czas druku podany przez autora
- 4,18 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A simple magazine holder for Army Armamant Pit Viper with molle support.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 934
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A simple magazine holder for glock magazines with Molle support. Can be used for a plate carrier or simply in the pocket if equipped with Molle.
Printed with PETG... as seen in the model a reinforcement in the area of the Molle clips on 100% infill. Print without supports.
To give the magazines still a special hold, you can still glue in an inner side a self-adhesive felt layer.
This holder fits for Airsoft AK PP19 magazines (example Arcturus AT19).
Built with Sketchup Trimble.