1 / 4
Snapmaker 2.0 Quickswap tool holder for Direct to wall or use with Honeycomb wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bracket to store your Quickswap kit equipped toolheads on any vertical surface.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 975
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (60)Powiązane
Why and what for.
Quickswap kit adds additional plate to the toolhead. This bracket can be mounted on a vertical surface and accept toolhead for storage.
Mount with
- Flat head screws directly to any surface.
- 3M VHB tape directly to any surface
- Honeycomb adapters (included) to mount on Honeycomb wall
- You will need a flat head screws like this.
If you like the idea
- Hit ❤ like, leave a comment, post a pic of the print, upload a Make.
- It does motivates me to share more of my projects.
Print settings
- Material - PLA/PETG/ASA/ABS.
- The rest is up to you.
- Supports - not needed.
- Parts orientation - included.
Additional parts
- For Honeycomb wall only
- M4 nut to attach to M4 honeycomb insert.
- M4x10mm flat head screw for attaching the insert to the bracket.
Additional Information
File includes 3 inserts for honecomb wall (author @RostaP). Don't forget to remove them in your slicer if you don't plan to attach the bracket to honeycomb wall.
- Check out the Honeycomb Wall Project that started it all.
- I also have honeycomb wall adapters for snapmaker tools here.
- The Quickswap Toolhead Plate available here.
- You can order the quickswap kit from snapmaker here.
Alternatives
- Check out Jasons wall mount bracket.
- Bracket to mount on snapmaker axis by Matrixx200x