Pet meal reminder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic reminder with movable indicator for pet meals
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
If you have a pet, you've probably experienced them begging for a meal when you're “positive” they have already eaten. If you're not using your smart/cell/mobile phone to track such things, this could be a useful model for you. Of course, it only works for pets that get two feedings per day.
The single magnet is 12mmx3mm, which I got from Amazon.
The check mark indicator is held in place by friction. You may need to scale the check model up or down by 1% or so in your slicer to make it fit snugly.
If you have a single filament printer, you could insert a pause to change filament at a specific layer to achieve better legibility (see photos).
Since the two models have slightly different heights, if you are doing a manual color change, you should probably print the models one at a time.
I printed mine with white PLA and transparent red on an original Ender-3 about two years ago. No supports should be required, although if your printer doesn't handle bridging well, you might need to consider using supports for the magnet indent.