Large Heavy Duty Wall hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The requirement was to hang and support a medium size mirror hanging from a Lanyard.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pretty strong wall hook, that doesn't look too bad on the wall. I needed it to hang a mirror and make certain it wouldn't easily fall down, also my wife wanted it too look good. It is designed for a M5 masonry screw, the inner hole is .29mm but can be drilled out to make it bigger or if you need a specific size hole, feel free to request in comments, I will try to update the file.
Print Settings used
Note the 3d Honeycomb really slows this print down, so if your object to hang is light weight you can probably use something faster.
