1 / 6
Basket for 3 liter Sangria or wine bag-in-box into the refrigerator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the best result print from PLA Prusament.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 275
- Wydruki
- 3
- Wyświetlenia
- 2006
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (1)Kolekcje (68)Powiązane
For the best result print from PLA Prusament. Printing settings: layer height 0,2mm, 2 perimeters, 10~15% infill, 3 botton and 3 top layers, detect thin walls, detect bridge layers, no supports needed. Clean openings in Basket for Ratchet from supports after printing. Use a ballpoint spring to drive the latch of Ratchet. Secure parts of Jaw (front with back) by super glue at assembly.