AnkerMake M5C GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the AnkerMake M5c phone holder to support the standard GoPro mount.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 323
- Wydruki
- 1
- Wyświetlenia
- 1691
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This was designed to hold a GoPro camera at a 90 degree angle on the right z-axis of an AnkerMake M5C for timelapses. The GoPro mount was remixed from this mount but has been scaled up by 2% to fit better.
Note: While designed to be screwed in, the mount is tight enough to support at least a GoPro Hero 8 without any nuts and bolts but I haven't tested other newer GoPro models.
I added a small square of foam underneath the “M” logo to cushion the print so that it wouldn't make noise when printing and fit extra snug.
Print Settings
Printer:
AnkerMakeM5c
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Filament:
Generic PLA
Print Notes:
Print between 2-3x's speed as I had some issues with supports falling off when printing at the default 5x mode.