1 / 1
Makita 18V sidemounted bitholder no magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mounted bitholder for Makita 18V
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Print this bitholder with TPU stock settings prefferably pretty light on the number off walls and infill. you can mount it to the side using an 4mm hex bolt with a cilinder head on it. Does not fit both sides but you can mirror it if you want ;-) no magnets needed