1 / 1
Saw and thin tool holder with French cleat backer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple gravity-based camming holder for thin tools (e.g. saws) for a French cleat system.
- Ocena
- 4,5 / 5
- Polubienia
- 104
- Pobrania
- 326
- Wydruki
- 4
- Wyświetlenia
- 1837
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 4) (Komentarze: 6)Remiksy (0)Kolekcje (253)Powiązane
Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue.
Cam lobe tires work great printed with TPU for friction, but a version with the cam lobe in full is also attached (may need some electrical tape or similar to provide enough friction for engaging the cam).