1 / 4
Skoda Octavia rear wiper spur gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spur gear for the rear wiper in Skoda Octavia II. Probably for other Skoda / VW car models too.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 855
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
Rear wiper stopped moving because teeth on the spur gear got damaged by the metal worm gear. If you're able to disassemble the rear trunk to release the wiper motor and the gear, the installation of the new gear is easy.
While disassembling the old one, be careful with the thin brass plate, that fits in the cutout of the spur gear.
I used PC filament to print the part. Print it with the cutout side on the bed.
The gear is cca 10th iteration, is well tested and works great for me.