1 / 3
Rockler dowel jig case with magnetic cover — zdjęcie 1
1 / 3

Rockler dowel jig case with magnetic cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a case to hold the Rockler dowel jig and drill and hex key

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
263
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

this case for the Rockler dowel jig can be stored horizontally/vertically or on a pegboard hook. it has a little extra space to store a few dowels/drill collars/etc

IMPORTANT PRINT NOTE: this requires 10x5x3 magnets to be placed into the print at two different layers, for the upper layer I did have to use a little bit of wood glue(school glue would likely also work fine) to keep the magnets from turning as they are close together. I did not have to wait for the glue to dry though to be enough to hold them in place.

Tagi